1. Connect the power to let the Paddy Husker(LIANGGONG) https://www.china-zjlg.com/product/rubber-roller-husker/ idling for 1 to 3 minutes, after the operation is stable, then slowly pull the material into the material to cut the material and put it into work. 2. Check the quality of the milled rice at any time. If the quality does not meet the requirements, adjust the discharge insert or adjust the gap between the rice knife and the grinding core. The method is as follows: if there are more valleys, first adjust the material discharge board to make the rice mouth properly reduced (if the rice mouth is small, the grain is still more.) The rice knife and the grinding heart gap should be adjusted smaller; If there is more broken rice, you should increase the rice mouth (or the gap between the rice knife and the heart). 3. After using the rice knives for a period of time, if there is a situation that is not sharp due to wear, the rice knives can be turned over and used. If there is a leak in the rice sieve, it should be replaced with a new one. 4. At the end of rice milling, the grain inserting plate should be inserted tightly, so that the rice in the crushed stone is completely crushed, and after the body is discharged, the power is cut off. Click Paddy Separator https://www.china-zjlg.com/product/paddy-separator-machine/ to learn about more information.