How the working equipment of the Rice Whitener(LIANGGONG) https://www.china-zjlg.com/product/rice-whitener-machine/ is used: 1. Press the power button to start, then put down the pressure. After the specified time, the rice whitener completes the equipment and stops automatically. First remove the hopper and remove the mink. Then plug in the hopper, then take out the pressure, turn the front handle to the right, so that the milled rice room falls into the hopper, turn the timing knob to 0, press the power button to make the wheel idle for a few seconds, so that the mill All the rice grains in the white room are dropped, and then the rice is pulled out and sieved to obtain the polished rice. 2. When the brown rice flows into the whitening chamber from the hopper, the brown rice is squeezed in the whitening chamber due to the internal pressure and mechanical force of the pressing, after the self-phase friction, and the mutual rubbing between the brown rice and the grinding wheel. That is, the cortex of the brown rice can be quickly removed, and the whiteness measured by the white rice is reached within a certain time of adjustment. Rice whitener machine complete equipment operation and maintenance: Before the whole machine is driven, the machine should be installed smoothly, check whether the components are normal, whether the parts and connections are loose or not. The transmission belts are suitable for tightening. The belts must be flexible, pay attention to the lubrication of each transmission part. After some inspections are normal, the control switch is activated, and after 2-3 minutes of idle rotation, the material can be processed. Click Rice Polisher https://www.china-zjlg.com/product/polishing-machine/ to learn about more information.