Recent Entries

• It Is Important To Know How To Seal Stainless Steel Qucik Fitti

  by fitting Tony March 9, 2020
    Stainless steel fittings exhibit many desirable properties, but a common problem is seizing or pick-up on assembly or disassembly, also known as galling. It’s thought to be caused by cold welding of the high points of clean, oxide free metal left when the oxide film is dislodged by sur...

• Saddle Clamp Manufacturer Is Good At Using A Clamp To Make Tool

  by fitting Tony March 2, 2020
  The one-of-a-kind Clamp Making Tool allows you to make strong, reliable clamps out of simple Stainless Steel Safety Wire. It can be used to replace worn or ineffective hose clamps, or to create clamps on virtually any material by tightening wires around an object and locking them in place. Follow th...

• Push to Connect Fitting Is Different From quick fitting

  by fitting Tony February 24, 2020
    Push to Connect couplings allow for a fast and easy way to repeatedly connect and disconnect air or fluid lines. If a tube or hose in a fluid or air system needs to be disconnected and reconnected on a frequent basis the best solution is a Push to Connect fitting. It will improve productivit...

• Which One Is Better, two piece of ball valve Or Gate Valves?

  by fitting Tony February 9, 2020
    When trying to control flow in industrial applications, you want to choose the best quality of valves and Valvesfittings. This will keep the piping secure and maintain them all in a leak-free state for years. Even when choosing high quality material, there is a range of types of two piece o...

• Do You Know Advantages pp compression fitting Has?

  by fitting Tony January 15, 2020
    The pp compression fitting eliminates the need for soldering or welding a connection, which makes them quick and simple to use. Further, no special skill or tool is needed to assemble and install the fitting. If a fitting is needed in an area that may need to be disassembled for maintenance,...

• Some Advantages Shown In two piece of ball valve

  by fitting Tony January 10, 2020
    Low Pressure Drop The two piece of ball valve design allows material to flow straight through the valve, minimizing pressure drop across the valve. The two piece of ball valve also have higher flow coefficients (Cv) compared to other control valve types of a similar size; this means that a ...

• Differences Between plastic ball valve and Plug Valves

  by fitting Tony December 30, 2019
    Ball and plug valves are very similar in terms of their basic function and application. Both are control valves which are used to provide tight shut-offs in different kinds of piping units. They also work on the same basic principle whereby a perforated disc is used to start or stop the flow...

• two piece of ball valve Has These Pros And Cons

  by fitting Tony December 26, 2019
    Pros: Some of the biggest benefits of two piece of ball valve are given below: Convenient Usage:Unlike other types of valves, ball valves are the most convenient in usage because of their simple mechanism. Due to the small size and lightweight of the ball valves, they are easier to handle....

• What Uses Are There In The plastic ball valve？

  by fitting Tony December 22, 2019
    The plastic ball valve is used widely throughout many industries in the United States, but is an essential hardware component in the home and micro brewing, pharmaceutical, chemical, agricultural, and construction fields. The two most important things to look for when you’re shopping f...

• When Should We Use two piece of ball valve?

  by fitting Tony December 18, 2019
    The options for ball valves are seemingly endless. To select a ball valve, decisions have to be made. Which seat material? What kind of end connections? Full, reduced, or standard port ball? 2-way or multiport? What about packing? Finally, how many pieces? In this post, we talked with one ...

• Do You Know Butterfly Valves And plastic ball valve?

  by fitting Tony December 13, 2019
    Valves are used in a wide range of applications to control the flow of slurries, liquids, and gases. Among the most common valves in use today are butterfly valves and plastic ball valve. Each type of valve has its own advantages and disadvantages, but each operates on similar underlying pri...

• How To Install two piece of ball valve

  by fitting Tony December 9, 2019
    The two piece of ball valve are the industry workhorses for flow control. These valves are manufactured with a central stainless steel ball with a machined hole through the middle, and are turned on and off by means of a quarter-turn handle on top of the valve. They are simple to use and eas...