It is very important to change the oil for [url=https://www.cnsuperpower.com/product/log-splitter/]Petrol Log Splitter[/url]. The quality of oil has a great influence on the equipment. High quality oil can effectively reduce the abrasion of the machine. So what should we do in this work?
1. cut off the power supply to prevent electric shock and wait for petrologsplitter to cool down until there is no danger of combustion.
2. The oil level should be consistent with the installation position. Check the oil level at the oil level plug and tighten the oil level plug and breather.
3. After cooling, the viscosity of the oil increases and it is difficult to drain the oil. Petrol Log Splitter should change the oil at the operating temperature (Note: the reducer should remain warm during oil change, and an oil receiving pan should be placed under the drain plug).
4. Open the Petrol Log Splitter oil level plug, breather and drain plug, remove all oil, install drain plug and inject new oil of the same brand.
5, pay attention to some quality, it is best to choose high quality oil.
The amount of oil has a great influence on the efficient performance of Petrol Log Splitter. Therefore, in the process of oil replacement, we must pay attention to the above points of attention and control every detail to ensure the quality of the equipment.