When direct glazing cannot reach the required brightness, supercalendering is a good method. Super calendering and laser imprint transfer adopt the same principle, i.e. using the flatness of BOPP labels ... moreWhen direct glazing cannot reach the required brightness, supercalendering is a good method. Super calendering and laser imprint transfer adopt the same principle, i.e. using the flatness of BOPP labels https://www.print-labels.net/product/plastic-labels/bopp-labels.html itself and its low surface energy characteristics, the printed gloss oil is compounded with BOPP labels by using a cold ironing device, then cured, and then the BOPP labels is rewound and collected by using the winding system of the cold ironing device for next reuse.
Since the surface energy of the BOPP labels is only 32 dynes, varnish cannot be attached to BOPP labels at all. However, as it is compounded with the flat BOPP labels and cured with a UV lamp, the cured gloss oil surface is as flat and glossy as the BOPP labels.
The precautions of BOPP supercalender are similar to those of cold ironing. However, since the BOPP labels are made of transparent material, the front and back sides need to be marked correctly to prevent the... less
The offered Plastic Bucket Mould is precisely designed in observance with set industry norms utilizing quality approved raw material with the help of advanced technology.
Signage fasteners or standoff screws as they are commonly known, are the best ways to show-off a three-dimensional display without using a frame. Standoffs fasten your sign to the wall, with a professional and visually pleasing one-inch gap in between... moreSignage fasteners or standoff screws as they are commonly known, are the best ways to show-off a three-dimensional display without using a frame. Standoffs fasten your sign to the wall, with a professional and visually pleasing one-inch gap in between the sign material and the wall.
Unlike most objects used to attach foamboards to the wall, standoffs become part of the design and presentation of the finished print. These screws are typically round and fit through the drilled holes on the wpc foam board print. Standoffs are made of aluminium, brass or nylon.
Brushed, chrome, nickel, and anodized are just some of the many finishes of standoffs available in stores. With standoffs, your awesome prints are projected from the wall for a visually pleasing display, and you won’t have to worry about your print falling off the wall with every bang.
There are two types of standoffs: a through-grip and an edge grip. To use a through grip style, you’ll need to drill holes into your foamboard print, while... less