The appearance of mechanical equipment has greatly liberated our labor force, but because of the different occupations, the requirements for chippers are also very different. Different occupations have different requirements for the thickness and size of the wood chipper, depending on the demand. Adjusting the distance between the flying knife and the bottom knife, how can we improve the efficiency of mechanical equipment and the quality of wood chips, let's talk about this question below, and hope that it will help us.

1. According to different materials: Under normal circumstances, the drum-type [url=https://www.cnsuperpower.com/]Black Diamond petrol Log Splitter[/url]can cut small diameter wood, slabs, slats, etc. under 120 mm, and the cut wood chips can be used as the material for fiberboard and pulp.
2. Too thick (above 350mm), too thin (below 30mm), too short (below 250mm), too thin (below 5mm), and irregular materials (undifferentiated stumps, branches, etc.) are insufficient for uniform cutting.
3. According to the purpose of wood chips: usually paper mills do not have specific requirements for the size of wood chips after processing, but in Guangxi, almost all wood chips require the thickness of the wood chips to be 0.3-05 cm, the length of the wood chips 2-5 cm, and the width 3- 8 cm. No matter what kind of log, it must be peeled, that is, after the wood has been peeled, the Black Diamond petrol Log Splitter can be processed into wood chips.

The final one is the wear of the bedknife: the bedknife has several cutting edges, depending on the type, there will be differences. Usually we have 6 cutting edges. After long-term use, there will be a certain amount of wear and tear. Grinding, this time needs to add coolant to ensure the stability of the chipper's sharpening, and usually do the maintenance of the equipment to greatly ensure the service life of the equipment.